Dehydration machine washing wood |
Product Characteristics and Uses
Bamboo laundry dryer ZMC4 dedicated to bamboo washing and
dehydration. Pulp and Paper Mill, after a round bamboo cut into the
bamboo, in this equipment to remove sand and gravel washing. Silt
and other heavy debris to avoid debris damage to the follow-up
process equipment, silt removal will help improve the quality and
reduce raw material in the pulp and paper into the silicon to the
alkali recovery effects. After washing of the bamboo from the screw
conveyor components sent to the next Road process equipment, and
filter out some of the surface of residual moisture in the bamboo.
The equipment consists of washing dewatering screw conveyor parts
and two parts.
1. Washing in part by the tank. Washing drum and the drive
component. Motor-driven gear box. Gearbox output shaft through a
pair of sprocket shaft connected with the wash drum. So that
sufficient power washing drum and the required speed. Swelling body
wash evenly distributed to a number of weeks with a certain tilt
chip washing leaves, leaves of both of their inclination to make a
smooth allocation of material and can feed off. Leaves covered with
permeable holes, so that when the bamboo being toggle the flow of
water through a small hole can be washed bamboo, bamboo on the silt
is washed under. Sink the upper part of the body feeding the mouth
of bamboo into the feed inlet into the liquid tank when the liquid
spray on a row of bamboo pipe erosion and reduce the possibility of
bamboo sink, some washed down The silt and heavy debris sink to the
bottom of the tank by a sewage discharge valve. Once the sewage
water valve at the top of the import, where water has played a prop
up the process to avoid the floating bamboo bamboo sink, so that
after washing the smooth discharge of bamboo into the screw
conveyor dewatering tank Inlet following a row of water spray water
and the lower part of the sewage pipe above the inlet valves are
for the washing of water by the sedimentation of the back, two
shares of water from the same back to back with the pump, in order
to make the water flow rate of 2 shares of water to meet their own
needs, are subject to matching by the user fitted with valves to
regulate.
2. Spiral conveyor dehydration mainly by the screw axis and the
shell composition, the equipment for the double-helix axis,
rotation opposite to the outside to inside rotation, two-axis each
of which has a motor driven gear box. Spiral tank for two-tier
structure, inner layer of stainless steel sieve. to facilitate
treatment, shell Tang Shui. When the shell Tangshui floor was
debris and dust through the sieve at the end of normal Tangshui
blocked when the gear box through the lower part of the upper two
holes, insert the pipe, the Tang Shui-channel wash clean, washing
need to reuse cone-shaped body of water, concentrated in the bottom
of the shell was discharged after treatment by sedimentation and
other recycling reuse.
Main technical parameters
1. Capacity: 100m3 / h
2. Wash drum diameter: 1400 * 1400mm
3. Washing drum rotation speed: 20rpm
4. Screw Size: 500 * 300 * 4500mm / 2 Tiao
5. Screw speed: 50rpm
6. Washing motor power: 7.5Kw
7. Screw motor power: 5.5Kw * 2
8. Equipment Total weight: 7700Kg
